Fujitsu 5900C Operator's Guide - Page 188
Settings, Device setting
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
■ Settings Using the Software Operation Panel, you can configure the following settings for the scanner connected to the PC. [Device setting] Item Page counter (Consumables counter) Power saving setting Offset setting Scan scale Explanation Selectable parameter Default For evaluating the consumable Pad/Pick roller/Separator Roller/Brake - replacement cycle. roller Use this function to reset the counters remaining ink level (only for the after replacing consumables. imprinter option) Refer to "5.1 Consumables and Replacement Cycle" on page 116 Select the waiting time before entering Setting range 15 to 55 minutes (set in the Power saving mode. steps of 5 min.) Refer to "8.2 Power saving setting" on page 172 15 min. Adjust the start position for the document scanning. Refer to "8.3 Offset/Scan scale" on page 173 Left right: setting range -2 to 3mm (set in 0.5mm steps) Up down: setting range -2 to 3mm (set in steps of 0.5mm) left right 0mm up down 0mm Adjust the magnification in the feed- Setting range -6.3% to 6.3% (set in 0% ing direction. 0.1% steps) Refer to "8.3 Offset/Scan scale" on page 173 168 8.1 Scanner Settings