Fujitsu 5900C Operator's Guide - Page 203

8.8 Page Edge Filler (Automatic paper size detection) When the scanner is set to detect paper size automatically, depending on the state of the documents, the black frame may be generated on the output image. If this is the case, you can improve the output image by using the "Page Edge Filler (Automatic paper size detection)" function. This function fills the end portion of the image with white so that it looks clean. Configure the settings for "Page Edge Filler (Automatic paper size detection)" as follows: 8 1. Start up the Software Operation Panel. Refer to "8.1 Scanner Settings" on page 166. 2. Select the "Page Edge Filler (Automatic paper size detection)" setting on the [Device Setting 2] tab. SCANNER SETTINGS 3. Specify the Top, Bottom, Right, and Left widths to fill. T T : Top edge = 0 ~ 7.5 mm D : Bottom edge = 0 ~ 7.5 mm R : Right edge = 0 ~ 7.5 mm L Generated R L : Left edge = 0 ~ 7.5 mm image (c an b e set in increments of 0.5mm) Filled area D The specified range is filled with white. 8.8 Page Edge Filler (Automatic paper size detection) 183