Fujitsu 5900C Operator's Guide - Page 22

1.1 Names and Functions of Parts This section describes the names of parts. ■ Front side 12 7 8 9 3 4 56 10 11 12 No. Name 1 Stopper 2 Stacker side guide 3 Top cover 4 Stacker 5 Ejector 6 Operator panel 7 Stacker extension 8 ADF cover 9 ADF cover open button 10 Pre-imprinter cover 11 ADF (Automatic document feeder) 12 Hopper extension 13 Hopper 14 Hopper side guides 15 Power button 15 13 14 Function Prevents ejected documents from dropping off the scanner. For aligning ejected documents to a certain width. Cover to access the consumables storage box and Post-Imprinter option (sold separately). Documents will be ejected into the Stacker after scanning. For ejecting the documents after scanning. For operating the scanner. For scanning long documents. Pull the extension out according to the document's length. Open the cover for cleaning the inner parts of the ADF or for replacing consumables. Button used to open the ADF For the Pre imprinter option The documents loaded onto the Hopper will be fed sheet by sheet for scanning. Pull the Hopper extension out for loading long documents. Documents to be scanned are loaded onto the Hopper. Sheet Guides used to make sure that the paper to be scanned is fed into the scanner straight, avoiding skew. Switch the scanner ON&OFF. 2 1.1 Names and Functions of Parts