Fujitsu 5900C Operator's Guide - Page 196
Start up the Software Operation Panel.
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
ATTENTION • When scanning documents of different length together in the same stack, select [Checking overlapping]. • If something is glued to the documents (stamps, memo or photos), they will be recognized as Multifeed when using [Checking overlapping]. When scanning such documents, use [Checking length difference] instead. However, when using the [detection area/none-detection area] function, you can also use [Checking overlapping]. • The setting can be done as well on the scanner driver configuration window. (In this case, the scanner driver selection will have priority) When [Check overlapping] is selected as the detection method, you can also specify the detection area. 1. Start up the Software Operation Panel. Refer to "8.1 Scanner Settings" on page 166. 2. Select the "Document check area specification for Multifeed Detection" setting on the [Device Setting 2] tab. 176 8.4 Multifeed Detection