Fujitsu 5900C Operator's Guide - Page 206
Paper Jam Detection
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
8.10 Paper Jam Detection You can set the degree of detection sensitivity for a jam at the feeder. Configure the settings for Paper Jam Detection as follows: 1. Start up the Software Operation Panel. Refer to "8.1 Scanner Settings" on page 166. 2. Select the "Paper jam detection" setting on the [Device Setting 2] tab. 3. Set the degree of detection sensitivity for a jam occurred at the feeder. If you encounter frequent jams, set the setting to "Sensitivity-Low". ATTENTION Setting to "Sensitivity-Low" reduces the detection accuracy for a paper jam. If you don't want to get your important document ripped or crumpled, be sure to set the setting to "Normal" to scan the document. 186 8.10 Paper Jam Detection
186
8.10 Paper Jam Detection
8.10 Paper Jam Detection
You can set the degree of detection sensitivity for a jam at the feeder.
Configure the settings for Paper Jam Detection as follows:
1.
Start up the Software Operation Panel.
Refer to
“8.1 Scanner Settings” on page 166
.
2.
Select the “Paper jam detection” setting on the [Device Setting 2] tab.
3.
Set the degree of detection sensitivity for a jam occurred at the feeder.
If you encounter frequent jams, set the setting to “Sensitivity-Low”.
ATTENTION
Setting to “Sensitivity-Low” reduces the detection accuracy for a paper
jam.
If you don’t want to get your important document ripped or crumpled, be
sure to set the setting to “Normal” to scan the document.