Fujitsu 5900C Operator's Guide - Page 55
Single Feed, Lift up the Pick roller unit., Place documents face-up at the center of the hopper table.
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
■ Single Feed 1. Lift up the Pick roller unit. Lift up the small plate on the left side using your finger. Pick Roller Unit 2 Hopper Guide Plate BASIC SCANNER OPERATIONS ⇒The Pick roller unit will click into place. ⇒The hopper will move up to the manual feed position. ATTENTION • If there is any document loaded on the Hopper, remove it before adjusting. • Be careful not to get your fingers or anything caught in the mechanism when the hopper table moves up. 2. Place documents face-up at the center of the hopper table. At this moment, do not stick the top edge of the document against the inner side of the hopper, instead set them a bit apart. 2.12 Feeding Documents Manually 35
35
2.12 Feeding Documents Manually
2
BASIC SCANNER OPERATIONS
■
Single Feed
1.
Lift up the Pick roller unit.
Lift up the small plate on the left side using your finger.
⇒
The Pick roller unit will click into place.
⇒
The hopper will move up to the manual feed position.
2.
Place documents face-up at the center of the hopper table.
At this moment, do not stick the top edge of the document against the inner side of the hopper,
instead set them a bit apart.
ATTENTION
•
If there is any document loaded on the Hopper, remove it before
adjusting.
•
Be careful not to get your fingers or anything caught in the mechanism
when the hopper table moves up.
Pick Roller Unit
Hopper
Guide Plate