Fujitsu 5900C Operator's Guide - Page 45
<Switching back to the horizontal setting, Slide the stacker out towards you.
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
BASIC SCANNER OPERATIONS ⇒The stacker will be fixed in a position tilting forward. • When set to "Bottom edge" position, the stacker does not move up or HINT down and becomes immovable even during scanning operation. • In this position, the stacker's maximum load will be 200 sheets. • If the pages do not stack well, use the Document Smoother. (See next section.) 2 ATTENTION When you align the documents from the leading edge (by tilting forward setting of stacker), the documents must meet the following conditions: (Length) ÷ (Width) < 1.5
25
2.7 Setting up the Stacker
2
BASIC SCANNER OPERATIONS
⇒
The stacker will be fixed in a position tilting forward.
<Switching back to the horizontal setting
1.
Slide the stacker out towards you.
2.
Push down the inner part of the stacker.
⇒
The stacker goes back into its horizontal position.
3.
Move your hands away from the stacker slowly.
HINT
•
When set to “Bottom edge” position, the stacker does not move up or
down and becomes immovable even during scanning operation.
•
In this position, the stacker’s maximum load will be 200 sheets.
•
If the pages do not stack well, use the Document Smoother. (See next
section.)
ATTENTION
When you align the documents from the leading edge (by tilting forward
setting of stacker), the documents must meet the following conditions:
Length
(
)
Width
(
)
÷
1.5
<