Fujitsu 6670 Operator's Guide - Page 136

Chapter 8 Troubleshooting 8.3 Troubleshooting This section describes troubles that may occur during scanning and how to remedy them. Before you ask for repair, check the following list for possible causes. If the remedies in these flowcharts do not solve the problem, check each item in "8.4 Before Contacting Your Dealer or Scanner Service Provider" (on page 152), and then contact the dealer where you purchased the scanner or an authorized FUJITSU scanner service provider. The possible troubles are listed as follows: Possible Trouble Scanner cannot be turned on. (See page 137.) Indication on Function Number Display goes out. (See page 138.) Scanning does not start. (See page 139.) Quality of scanned pictures or photos is not satisfactory when scanning in black and white. (See page 140.) Quality of scanned text or lines is unsatisfactory. (See page 141.) Images are distorted or blurred. (See page 142.) Vertical lines appear in scanned images. (See page 143.) Function Number Display indicates an error code (alphabetical letter plus number) alternately after the scanner is turned ON. (See page 144.) Multifeed errors occur frequently. (See page 145.) Pickup errors occur frequently. (See page 147.) Paper jams occur frequently. (See page 148.) Scanned images are elongated when scanned from the ADF. (See page 149.) There is a shadow on leading edge of scanned image. (See page 150.) The scanner is not recognized by your computer when Kofax VRS is used. (See page 151.) TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 136