Fujitsu 6670 Operator's Guide - Page 80

Chapter 5 Various Documents • Original image Color samples are displayed. Select a color to be dropped out. • Dropout Image The dropped out image is displayed. • [Color 1], [Color 2], and [Color 3] tabs Specify color(s) to be dropped out. Up to three colors can be specified at the same time. - [Dropout] checkbox Select this checkbox on both the [Color 2] and [Color 3] tabs to make this option effective when specifying two or more colors to be dropped out. - [Red]/[Green]/[Blue] fields Under [Dropout Color], the specified color's values and the sample color image are displayed. You can change the color values by directly typing in or by using the [ ] and/or [ ] buttons. - Sample color The color specified to be dropped out is shown here. • [Priority Black] checkbox Select this checkbox not to drop out text. This option prevents low-intensity colors such as black, which are generally used as text, from being dropped out. • Sensitivity For the color you selected, specify the allowable range of colors to be dropped out. Specifiable range: 15 to 180 degrees The larger the numeric value, the wider the color dropout range is. • [File] button You can display a desired image file (in the format of *.bmp) in the [Original image] area and select, from here, the color to be dropped out. • [Apply] button Applies the changes made and closes the dialog box. • [Cancel] button Cancels the changes made and closes the dialog box. 5 Click the [OK] button. ⇒ You are returned to the [TWAIN Driver (32)] dialog box. 6 In the [TWAIN Driver (32)] dialog box, click the [OK] button. ⇒ The changes made are saved. 7 From ScandAll PRO, perform a scan. For how to perform a scan, refer to "Chapter 3 How to Use ScandAll PRO" (on page 51). TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 80