Fujitsu 6670 Operator's Guide - Page 166
Resetting the counters, Replacing and Cleaning Instructions, Daily Care,
UPC - 097564307454
View all Fujitsu 6670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Chapter 9 Operational Settings ■Resetting the counters Reset the consumables counter(s) every time you replace the consumable(s). Follow the procedure below. 1 Click the [Clear] button beside the replaced consumable. 2 Click the [OK] button on the confirmation message displayed. ⇒ The counter is reset to 0. The remaining ink indication (percentage) is reset to 100. 3 In the Software Operation Panel, click the [OK] button. ■Replacing and Cleaning Instructions The following may sometimes appear while using the scanner: Replacing instruction: TOP Contents Index Introduction Scanner Overview Loading Documents Cleaning instruction: How to Use ScandAll PRO Scan Parameters According to the instruction displayed, clean the scanner or replace the consumables. When you click the [Ignore] button, the cleaning instruction disappears and the scanning continues. You may be able to continue the scanning for a while, however, it is recommended that you replace the consumable(s) as soon as possible. To stop the scanning and replace the consumable(s) right away, click the [Cancel] button. For how to replace the consumables, refer to the following sections: Pick Roller; see "7.2 Replacing the Pick Rollers" (on page 125). Brake Roller; see "7.3 Replacing the Brake Roller" (on page 127). For how to clean the scanner, refer to "Chapter 6 Daily Care" (on page 114). Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 166