Fujitsu 6670 Operator's Guide - Page 180

Chapter 9 Operational Settings 9.5 Settings Related to Multifeed Detection Multifeed Detection A "multifeed" is a feeding error that occurs when two or more sheets in the ADF paper chute are fed simultaneously into the scanner. If you continue scanning document without knowing this multifeed error, you could skip some of important data while scanning the document. This scanner has the Multifeed Detection function to prevent such troubles. With the Multifeed Detection enabled, the scanner indicates an error message and halts the scanning immediately at a multifeed error. Note that the Multifeed Detection is not available for the range about 30 mm from the leading edge of document. 2 From the tree listing on the left, select [Device Setting 2] D [Multifeed]. 1 Start up the Software Operation Panel. Refer to "9.1 Starting Up the Software Operation Panel" (on page 156). 3 Select one of the following detection methods. Detection Method Description None Does not detect multifeeds. TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 180