Fujitsu 6670 Operator's Guide - Page 161
Documents
UPC - 097564307454
View all Fujitsu 6670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Chapter 9 Operational Settings Item Explanation Selectable Parameters Default Pre-pick Document check area specification for Multifeed Detection Intelligent Multifeed Function To give a higher priority to Yes/No Yes processing speed, select [Yes], if not, select [No]. Can also be specified from the scanner driver's setting dialog box. Note the setting with the scanner driver is given a priority. Selected range: Check this item when limiting the range of detecting multifeeds. You can determine if multifeed detection is enabled or disabled for the specified area. Check or do not check "Selected range" Enable/Disable (when "Selected range" is checked) Do not check Disable Start: Specify the start point of the check area in length (mm) from the top edge of the document. 0 to 510 mm (in increments of 2 mm) 0 mm End: Specify the end point of the check area in length (mm) from the top edge of the document. 0 to 510 mm (in increments of 2 mm) 0 mm Bypass multifeed detection by remembering the pattern (size and location) of glued paper on the document. Note that you need to select "Check Overlapping" beforehand by referring to "Multifeed Detection" (on page 180). Manual Mode/Auto Mode 1/Auto Mode 2 Manual Mode Connection via SCSI/USB Connector 1 Connection via SCSI/USB Connector 2 Yes: Configurable No: Not configurable Yes No Yes Yes Yes Yes TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 161