Fujitsu Fi-5110EOX2 Operating Guide - Page 146

Symptom, Check This Item, Remedy, Is the Pad ASSY worn?

Get Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner PDF manuals and user guides View all Fujitsu Fi-5110EOX2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 146 highlights

Symptom Lines on the document are blurred. (Example: Ruled lines on a table cannot be seen.) The scanning speed is very slow. Multi-feeds (*4) occur frequently. Paper is not fed (stops midway). Check This Item Are you scanning in color mode, documents including handwritten or typed text, tables or frames with ruled lines? Does your PC satisfy the recommended system requirements? Is the USB 1.1 connected? Note: When using an USB1.1 interface, the data transfer rate may be slower due to large data sizes. Is the Pad ASSY dirty? Is the Pad ASSY worn? Is the document stack thicker than 5mm? Is the Pick roller dirty? Is the Pick roller worn out? Are there any debris on the document feeding path? Do the loaded documents satisfy the conditions described in section "3.2 Scanning Different Document Types" (page 30)? If not, they might not pass smoothly through the ADF. Remedy The color mode is used for capturing colored images like photos in high quality. For other documents including textual content, select the check box for [Setting for text only document] at [Scanning] - [Option] in the "Scan and Save Settings" window. Confirm the system requirements in " Before Installing ScanSnap" (page 6). Scanning speed will be slower whenever the recommended CPU and memory requirements are not met. If this is the case, at [Scanning] - [Option...] in the "Scan and Save Settings" window, clear the check boxes of the following to increase the scanning speed. • Allow automatic image deskew • Allow automatic image rotation If your PC has an USB 2.0 port, connect the scanner to this port. (If using a USB hub, it must also support USB 2.0 interfaces.) (*3) Clean the pad following the instructions in "6.3 Cleaning the Inside of the Scanner" (page 136). Clean the Pad ASSY following the instructions in "7.2 Replacing the Pad ASSY" (page 144). Reduce the number of sheets in the document sheet to 5mm thickness or less. Clean the Pick roller following the instructions in "6.3 Cleaning the Inside of the Scanner" (page 136). Clean the Pick roller following the instructions in "7.3 Replacing the Pick Roller" (page 147). Remove any debris from the document feeding path. (Refer to "5.1 Clearing Document Jams" (page 124). Try the following: • Slightly push through with your finger the first sheet of the documents at the start of scanning. • Change the insertion direction of the docu- ment. 128

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
128
Lines on the document
are blurred.
(Example: Ruled lines
on a table cannot be
seen.)
Are you scanning in color
mode, documents including
handwritten or typed text,
tables or frames with ruled
lines?
The color mode is used for capturing colored
images like photos in high quality. For other
documents including textual content, select
the check box for [Setting for text only docu-
ment] at [Scanning] – [Option] in the “Scan
and Save Settings” window.
The scanning speed is
very slow.
Does your PC satisfy the
recommended system
requirements?
Confirm the system requirements in " Before
Installing ScanSnap" (page 6).
Scanning speed will be slower whenever the
recommended CPU and memory require-
ments are not met.
If this is the case, at [Scanning] - [Option...] in
the "Scan and Save Settings" window, clear
the check boxes of the following to increase
the scanning speed.
•
Allow automatic image deskew
•
Allow automatic image rotation
Is the USB 1.1 connected?
Note:
When using an
USB1.1 interface, the data
transfer rate may be slower
due to large data sizes.
If your PC has an USB 2.0 port, connect the
scanner to this port. (If using a USB hub, it
must also support USB 2.0 interfaces.) (*3)
Multi-feeds (*4) occur
frequently.
Is the Pad ASSY dirty?
Clean the pad following the instructions in "6.3
Cleaning the Inside of the Scanner" (page
136).
Is the Pad ASSY worn?
Clean the Pad ASSY following the instructions
in "7.2 Replacing the Pad ASSY" (page 144).
Is the document stack
thicker than 5mm?
Reduce the number of sheets in the document
sheet to 5mm thickness or less.
Paper is not fed (stops
midway).
Is the Pick roller dirty?
Clean the Pick roller following the instructions
in "6.3 Cleaning the Inside of the Scanner"
(page 136).
Is the Pick roller worn out?
Clean the Pick roller following the instructions
in "7.3 Replacing the Pick Roller" (page 147).
Are there any debris on the
document feeding path?
Remove any debris from the document feed-
ing path. (Refer to "5.1 Clearing Document
Jams" (page 124).
Do the loaded documents
satisfy the conditions
described in section "3.2
Scanning Different Docu-
ment Types" (page 30)?
If not, they might not pass
smoothly through the ADF.
Try the following:
•
Slightly push through with your finger the
first sheet of the documents at the start of
scanning.
•
Change the insertion direction of the docu-
ment.
Symptom
Check This Item
Remedy