Fujitsu Fi-5110EOX2 Operating Guide - Page 92

Mode: Create facing pages in one image - Mode: Create front and back images separately Business Card Portrait (55 x 90mm) Business Card Landscape (90 x 55mm) Custom (Can create up to 5) • If you specify [Automatic Detection] on [Output image size], the size of the HINT scanned document is automatically determined among the standard sizes (other than Custom and Carrier Sheet Size) described in the above table. There is no need to respecfiy an [Output image size] to fit the loaded doc- ument for that reason. • If you specify [Carrier Sheet size] on [Output image size], the scanned image is generated in the Carrier Sheet size. After scanning, you can trim the image to your preferred size with applications such as Adobe Acrobat 7.0. To trim the image using Adobe Acrobat 7.0, from the menu bar, select [Tools] -> [Advanced Editing] -> [Crop tool], and double-click the selected area for the necessary image portion. ATTENTION • If you specify [Automatic Detection] on [Output image size] to scan a document which size is not among the possible scan sizes on the above table, the scanned image is bigger than the document size as well as nearest to the fixed size If you want to scan a document in its size, create a document size at the [Custom] button, and select that size on [Output image size]. • If you specify [Automatic Detection] on [Output image size], the generated size may be bigger than that of the scanned document. In this case, carry out the following operation. - Insert the document into the Carrier Sheet straight. - When you load the Carrier Sheet onto the scanner, use the side guides to secure the Carrier Sheet. If the situation does not improve with the above methods, specify the size of the document on [Output image size]. 74