Fujitsu Fi-5110EOX2 Operating Guide - Page 49

3.2 Scanning Different Document Types Do not use the following documents: HINT • Documents with paper clips or staples (they can be used after the paper clips or staples are removed) • Documents on which the ink is still wet (they can be used after the paper is thoroughly dried) • Documents larger than Legal (width: 8.5 in, length: 14 in) • Documents folded in half larger than 216 x 297 mm (W x L) (8.5 x 11.7 in) • Materials other than paper such as fabric, metal foil, or transparencies • Carbon paper • thermal paper Also, if you load the following documents directly on the scanner, the documents may be damaged or may not be scanned successfully. It is recommended to insert and then scan the documents inside the Carrier Sheet: • Documents smaller than 2 (width) x 2 (length) inches • Documents thinner than 52 g/m2 (14 lb) and thicker than 127 g/m2 (34 lb) • Documents of non-uniform thickness (e.g. envelopes, paper which has another paper pasted on, etc.) • Wrinkled or curled documents • Folded or torn documents • Tracing paper • Coated paper • Photographs (printing paper) • Perforated or punched documents • Documents that are not square or rectangular • Documents of non-uniform width • Carbonless paper 3 Basic Scanner Operations ATTENTION • To prevent the rollers from getting dirty, avoid scanning documents containing large areas written or filled with pencil. If the scanning of such documents is inevitable, clean the rollers more frequently. For details refer to "6.2 Cleaning the Scanner Exterior" (page 135). • Carbonless paper contains chemical substances that may harm the Pad ASSY or rollers (e.g. Pick roller) when documents are fed. Pay attention to the following: - Clean the Pad ASSY or rollers as frequently as possible. - The service life of the scanner may be shortened compared with the case of scanning woodfree paper. ScanSnap fi-5110EOX2 Operator's Guide 31