Fujitsu Fi-5110EOX2 Operating Guide - Page 81
<When changing the settings>, OK] button.
View all Fujitsu Fi-5110EOX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
3.4 Changing Scan Settings 1) In the "Add or Remove Custom sizes" window, select the document size to be changed and click the [Change...] button. 2) Change the settings in [Additional custom size settings]. 3) To complete the setting, click the [OK] button. 4) The screen returns to the "Add or Remove Custom sizes" window and the changes are saved. Click [Close] to exit from the "Add or Remove Custom sizes" window. When "Automatic detection" is specified, the scanner automatically detects the HINT document size and select an appropriate document size from the standard sizes (except for customized document sizes) described in the previous page. So there is no need to specify "Paper size" again to match the size of the loaded document, which makes ScanSnap easier to use. 3 Basic Scanner Operations ATTENTION • When you select "Automatic detection" and load an A6 size document onto the scanner, the document is sanned as "Post card" size. • Do not load documents with different sizes simultaneously onto the scanner. • When "Automatic detection" is selected, documents of non standard sizes are regarded as documents of a standard size (Letter, Legal, A4, B5, A5, B6, A6, or Business card), that is closest to their actual length. For length, scanned using the length of the document. For width, it is scanned using the standard size closest to the document length and the width of the standard size is used.. Example: For a document of 150 mm x 200 mm Length: Output in 200 mm as it is Width: A5 is selected from the length of 200 mm -> output at a width of A5 (148 mm) To scan these kinds of documents just in their sizes, select "Custom" in "Paper size:" and then specify the document size in the dialog box that appears when you click the [Custom...] button. • When you select Business card (90 mm x 55, 55 mm x 90 mm) and scan: From the scanned length, the horizontal or vertical postion is automatically recognized and scanned. For length (loading direction), it is the actual scanned length of the card. For width, it is fixed at 90 mm (horizontal position), or 55 mm (vertical position). ScanSnap fi-5110EOX2 Operator's Guide 63