Fujitsu Fi-5110EOX2 Operating Guide - Page 63
Scanning starts, and the image data is generated in the specified size.
View all Fujitsu Fi-5110EOX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3.3 Loading Documents SCAN 7. Press the [SCAN] button. ⇒ Scanning starts, and the image data is generated in the specified size. ATTENTION • The output image is generated with the scanned document image placed in the center of the specified size of the output image. In the "Carrier Sheet Settings" window, when "Automatic Detection" in "Output image size" is selected, an ideal size among the standard sizes is selected automatically (refer "3.6 Changing Carrier Sheet Set- tings" (page 72)). • In the "Carrier Sheet Settings" window, when "Automatic Detection" in "Output image size" is selected, the generated image size may be smaller than the document. Example: If A5 size image is printed in the center of an A4 document =>it is generated in A5. 3 To output an image that is the same size as the document size, set the document size in "Output image size". If the following symptoms are observed, place a piece of white paper HINT behind the document. • The scanned document cannot be generated in a suitable size (in [Automatic Detection]) • A shadow appears on the edges of the document • Black lines appear around the document that is cut into an unusual shape Basic Scanner Operations white paper ScanSnap fi-5110EOX2 Operator's Guide 45