Gateway NV-53A Service Guide - Page 56
Adding or replacing memory modules, Tools you need to complete this task
View all Gateway NV-53A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
CHAPTER 3: Replacing notebook components Adding or replacing memory modules Important Use only memory modules designed for this Gateway notebook. Tools you need to complete this task: Phillips #0 screwdriver Non-marring plastic scribe To add or replace memory modules: 1 Complete the steps in "Preparing the notebook" on page 47. 2 Complete the steps in "Removing the bay cover" on page 49. 3 If you are replacing a memory module, go to step 4. If you installing an additional memory module, go to step 6. 4 Use a non-marring plastic scribe to push out the latches on both sides of the memory slot until the module tilts upward. 5 Remove the memory module from its slot. 50
CHAPTER 3: Replacing notebook components
50
Adding or replacing memory modules
Tools you need to complete this task:
To add or replace memory modules:
1
Complete the steps in
“Preparing the notebook” on page 47
.
2
Complete the steps in
“Removing the bay cover” on page 49
.
3
If you are replacing a memory module, go to
step 4
.
If you installing an additional memory module, go to
step 6
.
4
Use a non-marring plastic scribe to push out the latches on both sides of
the memory slot until the module tilts upward.
5
Remove the memory module from its slot.
Important
Use only memory modules designed for this Gateway notebook.
Phillips #0 screwdriver
Non-marring plastic scribe