Gateway NV-53A Service Guide - Page 58
Replacing the wireless card, Tools you need to complete this task:, Screws removed during this task
View all Gateway NV-53A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
CHAPTER 3: Replacing notebook components Replacing the wireless card Tools you need to complete this task: Phillips #0 screwdriver Non-marring plastic scribe Screws removed during this task: • 1 black M2×5 (wireless card) To replace the wireless card: 1 Complete the steps in "Preparing the notebook" on page 47. 2 Complete the steps in "Removing the bay cover" on page 49. 3 Detach the bar code sticker covering the antenna cables. 4 Unplug the antenna cables. Note which color cable corresponds to each of the connectors. Important The number of antenna cables varies depending on the type of wireless card installed on the notebook. IEEE 802.11n cards typically have three antenna cables. Other types of wireless cards usually have only two antenna cables. 5 Move the antenna cables away from the wireless card screw. 52