Gateway NV-53A Service Guide - Page 70
Replacing the LCD panel assembly, Tools you need to complete this task:, Screws removed during - hinges
View all Gateway NV-53A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
CHAPTER 3: Replacing notebook components Replacing the LCD panel assembly Tools you need to complete this task: Phillips #0 screwdriver Flat screwdriver or Non-marring plastic scribe Screws removed during this task: • 3 black M2.5×6 (keyboard cover) • 2 black M2.5×6 (LCD panel hinges - bottom) • 2 black M2.5×6+Nylok (LCD panel hinges - top) To replace the LCD panel assembly: 1 Complete the steps in "Preparing the notebook" on page 47. 2 If the notebook has a wireless card installed, complete the steps in "Removing the bay cover" on page 49, and then unplug the antenna cables. If there's no wireless card installed, proceed to step 5. 3 Remove the keyboard by performing steps 2-4 of the "Replacing the keyboard" procedure on page 62. Caution The keyboard is connected to the notebook through a keyboard cable. Disconnect this cable first before pulling the keyboard away from the palm rest assembly. 4 Turn the notebook over so the base is facing up. 5 Remove the base screws that secure the LCD panel hinges. 64