Gateway NV-53A Service Guide - Page 79
procedure on, Remove the speaker screws.
View all Gateway NV-53A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
www.gateway.com 5 Remove the speaker screws. 6 Release the speaker cable from the palm rest, and then remove the speakers. 7 Position the new speakers on the palm rest. 8 Secure the speakers with the screws removed in step 5 and cover it with the tape that was detached in step 4. 9 Secure the speaker cable on the palm rest latches 10 Reinstall the palm rest by performing steps 19-21 of the "Replacing the palm rest" procedure on page 68. 11 Reinstall the LCD panel assembly by performing steps 16-23 of the "Replacing the LCD panel assembly" procedure on page 64. 12 Reinstall the keyboard and the keyboard cover by performing steps 5-8 of the "Replacing the keyboard" procedure on page 62. 13 Return the optical screw drive in its place. 14 Reinstall the hard drive by performing steps 8 and 9 of the "Replacing the hard drive" procedure on page 54. 15 If you have disconnected any wireless antennas, reconnect them now. 16 Reinstall the bay cover. 73