Gateway NV-53A Service Guide - Page 69
Insert the retaining tabs of the new keyboard into the slots located on the, procedure
View all Gateway NV-53A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
www.gateway.com 5 Insert the retaining tabs of the new keyboard into the slots located on the top side of the touchpad area. 6 Reach underneath the keyboard and insert the keyboard cable to its system board connector, then close the clip to lock the cable in place. Important The keyboard cable is correctly oriented if it is not twisted. 7 Gently press the keyboard down until it is flat all the way across. 8 Reinstall the keyboard cover by performing steps 9-13 of the "Replacing the keyboard cover" procedure on page 58. 9 Reinstall the battery. 63
www.gateway.com
63
5
Insert the retaining tabs of the new keyboard into the slots located on the
top side of the touchpad area.
6
Reach underneath the keyboard and insert the keyboard cable to its system
board connector, then close the clip to lock the cable in place.
7
Gently press the keyboard down until it is flat all the way across.
8
Reinstall the keyboard cover by performing steps
9
–
13
of the
“Replacing the
keyboard cover”
procedure on
page 58
.
9
Reinstall the battery.
Important
The keyboard cable is correctly oriented if it is not twisted.