Gateway NV-53A Service Guide - Page 86
Replacing the USB board, Tools you need to complete this task:, Screws removed during this task
View all Gateway NV-53A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
CHAPTER 3: Replacing notebook components Replacing the USB board Tools you need to complete this task: Phillips #0 screwdriver Flat screwdriver or Non-marring plastic scribe Screws removed during this task: • 1 black M2×5 (hard drive) • 1 black M2.5×6 (optical drive) • 3 black M2.5×6 (keyboard cover) • 2 black M2.5×6 (LCD panel hinge - bottom) • 2 black M2.5×6+Nylok (LCD panel hinge - top) • 10 M2.5×6 black (palm rest - base side) • 3 M2.5×6 black (palm rest - top side) To replace the USB board: 1 Complete the steps in "Preparing the notebook" on page 47. 2 Complete the steps in "Removing the battery" on page 48. 3 Complete the steps in "Removing the bay cover" on page 49. 4 If the notebook has a wireless card installed, unplug the antenna cables. 5 Remove the hard drive screw, and then remove the hard drive from its compartment. 80