Gateway NV-53A Service Guide - Page 64
Replacing the keyboard cover, Tools you need to complete this task:, Screws removed during this task - keyboard removal
View all Gateway NV-53A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
CHAPTER 3: Replacing notebook components Replacing the keyboard cover Tools you need to complete this task: Phillips #0 screwdriver Flat screwdriver or Non-marring plastic scribe Screws removed during this task: • 3 black M2.5×6 (keyboard cover) To replace the keyboard cover: 1 Complete the steps in "Preparing the notebook" on page 47. 2 Complete the steps in "Removing the battery" on page 48. 3 Remove the screws securing the keyboard cover. 4 Turn the notebook over and open the LCD panel to its fully extended position. 5 Insert a small flat-blade screwdriver or non-marring scribe between the LCD hinge side and the keyboard cover, and carefully pry the cover up. 58
CHAPTER 3: Replacing notebook components
58
Replacing the keyboard cover
Tools you need to complete this task:
Screws removed during this task:
•
3 black M2.5×6 (keyboard cover)
To replace the keyboard cover:
1
Complete the steps in
“Preparing the notebook” on page 47
.
2
Complete the steps in
“Removing the battery” on page 48
.
3
Remove the screws securing the keyboard cover.
4
Turn the notebook over and open the LCD panel to its fully extended position.
5
Insert a small flat-blade screwdriver or non-marring scribe between the LCD
hinge side and the keyboard cover, and carefully pry the cover up.
Phillips #0 screwdriver
Flat screwdriver
or
Non-marring plastic scribe