HP 5200tn HP LaserJet 5200 Series Printer - Software Technical Reference (Exte - Page 164

The Source is: drop-down menu can contain the following options, depending on what has been installed on the device: ● Automatically select ● Manual Feed in Tray 1 ● Tray 1 (100-sheet multipurpose tray) ● Tray 2 (250-sheet tray) ● Tray 3 (optional 500-sheet tray) The default setting is Automatically Select. When this setting is selected, the HP LaserJet 5200 uses the source tray that supports the media size that you have selected. If you select a source tray other than Automatically select, make sure that the correct media size is loaded in the source tray. Type is The Type is: drop-down menu shows all of the media types that the HP LaserJet 5200 supports. When you use the default setting, Unspecified, the printer uses the default media type, which is usually Plain. The following standard types appear in the list: ● Unspecified ● Plain ● Preprinted ● Letterhead ● Transparency ● Prepunched ● Labels ● Bond ● Recycled ● Color ● Cardstock 164-200 g/m2 (45-53 lb) ● Rough ● Vellum ● Envelope ● Light 60-75 g/m2 (16-20 lb) ● Tough Paper (Glossy Film) The default setting is Unspecified, and the program selects the media type. If you select a different setting, make sure that the correct media type is loaded in the tray that you selected in the Source is: setting. HP traditional print drivers for MS Windows 142 Chapter 4 HP traditional print drivers for MS Windows ENWW