HP LaserJet 8000 HP LaserJet 8000, 8000 N, 8000 DN, and HP Mopier 240 Printers - Page 177

Chapter 5 Problem Solving 177 Printer Messages (continued) Message USE [TYPE] [SIZE] INSTEAD? WAIT FOR PRINTER TO REINITIALIZE WRONG ENVELOPE FEEDER INSTALLED XX.YY PRINTER ERROR PRESS GO TO CONTINUE 13.x PAPER JAM [LOCATION] Explanation or Recommended Action If the requested paper size or type is not available, the printer asks if it should use another paper size or type instead. Press - VALUE + to scroll through the available types and sizes. Press SELECT to accept the alternate type or size. The RAM disk setting has been changed from the printer's control panel. This change will not take effect until the printer reinitializes. If you change the mode of the external devece, turn the printer off and then turn the printer on and wait for the printer to reinitialize. The envelope feeder you are trying to install will not work for this printer. To order an envelope feeder for the printer, see page 36. Make sure the is installed correctly (page 109). A printer error has occurred which can be cleared by pressing GO in the printer's control panel. Remove jammed paper from the specified location (page 146). Open and close the top cover to clear the message. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. (See the HP Support pages at the front of this user guide.) Understanding Printer Messages