HP LaserJet 8000 HP LaserJet 8000, 8000 N, 8000 DN, and HP Mopier 240 Printers - Page 267
Envelopes, Envelope Construction
View all HP LaserJet 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Appendix A Specifications 267 Envelopes Note For best results, use the Left Output Bin. Envelope Construction Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components: z Weight: See page 258 for supported envelope weight. z Construction: Prior to printing, envelopes should lie flat with less than 0.25 inch (6 mm) curl, and should not contain air. (Envelopes that trap air may cause problems.) z Condition: Make sure envelopes are not wrinkled, nicked, or otherwise damaged. z Sizes in Tray 1: See page 256 for supported paper sizes. z Sizes in the optional envelope feeder: From 3.5 by 6.3 inches (90 by 160 millimeters) to 7 by 10 inches (178 by 254 millimeters). Continued on next page. Paper Specifications