HP LaserJet 8000 HP LaserJet 8000, 8000 N, 8000 DN, and HP Mopier 240 Printers - Page 203
Problem Solving, Determining Printer Problems, Problems with the Optional 5-bin Mailbox with Stapler
View all HP LaserJet 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Chapter 5 Problem Solving 203 Problems with the Optional 5-bin Mailbox with Stapler Situation Solution The job was not stapled. Jobs sent to the stapler might not be stapled for one or more of the following reasons: z The wrong size or type of paper was used for the job. z More than 20 pages were sent to the stapler, exceeding its capacity. z The stapler has bent or broken staples in the stapling bed. (See page 164.) z A staple jam was recently cleared (up to 12 following jobs might not be stapled). z The job was sent to a bin other than the stapler bin because the wrong size or type of paper was used for the job. z One-page jobs will not be stapled. z The interface cable between the mailbox and the stapler unit may be defective or not connected properly. General repeated stapler z Check to see that the job to be stapled is less than 2 mm thick. jam problems. z Stapler may have some trapped staple wires that are obstructing the magazine. Remove loose staples and paper dust from the inside of the stapler (page 164). Determining Printer Problems