HP LaserJet 8000 HP LaserJet 8000, 8000 N, 8000 DN, and HP Mopier 240 Printers - Page 307
Cfg Tcp/ip=no, Bootp=yes, Bootp=no, Cfg Etalk=no, Etalk Phase=1
View all HP LaserJet 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
Appendix B Control Panel Menus 307 Item Values CFG TCP/IP=NO NO YES CFG ETALK=NO NO YES Explanation NO: The TCP/IP Menu is not accessible. YES: The TCP/IP Menu appears. In the TCP/IP Menu, you can specify BOOTP=YES for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turned on. If you specify BOOTP=NO, you can manually set selected TCP/IP parameters from the control panel. You can manually set each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). Also, you can manually set the Timeout time period. NO: The EtherTalk Menu is not accessible. YES: The EtherTalk Menu appears. In the EtherTalk Menu you can set the AppleTalk phase parameter (ETALK PHASE=1 or 2) for your network. EIO Menu (8000 N/8000 DN)