HP Scitex FB10000 Site Preparation Guide Rev. 2 - Page 16

Site Preparation Specifications Summary Table 2-1 provides a summary of important site preparation requirements for the HP Scitex FB10000 Industrial Press. It is the customer's responsibility to prepare the site according to the specifications in this table before machine delivery. Important This table is provided as a handy visual aid when preparing the site. It is not intended as a substitute for a thorough review of the complete contents of this Site Preparation Guide. Table 2-1 Summary of Site Preparation Specifications Safety Fire extinguishers Waste disposal Eye wash station First aid equipment Two CO2 extinguishers. See Fire Hazard on page 16. According to local regulations. See Waste Disposal on page 17. Suitable station within 15 m (49 ft.) of See Provision for an Eye Wash print production area. Station on page 18. According to local regulations. See Provision for First Aid Treatment on page 18. Site Readiness Unloading area Minimum pathway for installation Machine delivery Floor surface and strength Minimum recommended room dimensions Sufficient area for two large trucks and a heavy-duty crane. See Unloading Area on page 22. Doorway dimensions: • Minimum: 2.4 m (8 ft.) W x 2.5 m (8.2 ft.) H • Recommended: 3 m (10 ft.) W x 2.5 m (8.2 ft.) H See Pathway on page 22. Booking a professional rigging company with suitable equipment (heavy-duty crane, steel beam, chains, straps, forklift, and so on). See Machine Delivery and Rigging on page 59. Smooth, flat surface capable of See Floor Surface and Strength on supporting 8200 kg (18077 lbs.) with page 24. maximum incline of 0.2%. • Length: 15 m (49 ft.) • Width: 10 m (33 ft.) • Height: 3.5 m (11.5 ft.) See Planning the Print Production Area on page 20. Electrical Requirements Number of power lines 2 See Electrical Requirements on page 28. 8 HP Scitex FB10000 Site Preparation Guide, Rev. 2