HP Scitex FB10000 Site Preparation Guide Rev. 2 - Page 57

RIP Applications The RIP application is part of the FB10000 workflow and plays an important role in preparing the print files. The RIP application is used in various processes during file preparation in order to achieve the optimum image quality, job size, print resolution, color management, and much more. The FB10000 system can be used with the following RIP applications: • Onyx Thrive • Caldera GrandRIP+ Support for the RIP applications is provided in accordance with the applicable purchase contract or support agreement between the HP Scitex and the customer. The FB10000 press is supplied without the RIP hardware, and it is the customer's responsibility to purchase the computer required for the RIP application according to the specifications provided by the RIP application manufacturer. Table 4-18 provides links to the hardware requirements for each supported RIP application. Table 4-18 Links to RIP Application Hardware Requirements RIP Application Link Onyx Thrive Caldera GrandRIP+ http://www.onyxgfx.com/ index.php?area=viewinfo&action=kbase&id=5017000000 0QxwwAAC http://www.caldera.com/support/minimal-requirements/ Tip System performance can be significantly improved if you use more RAM and a faster CPU than those listed above. The required hardware for the selected RIP should be available on-site before arrival of the FB10000 press. Otherwise, the installation procedure, system tests and application training may be affected. Chapter 4 - Site Planning 49