HP Scitex FB10000 Site Preparation Guide Rev. 2 - Page 46
Pneumatic Requirements, and be located near the FB10000 press.
View all HP Scitex FB10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Pneumatic Requirements It is the customer's responsibility to provide a supply of compressed air to the HP Scitex FB10000 Industrial Press. Compressed air may be supplied by a central air supply system, or through the use of a dedicated air compressor. In either situation, a wall-mounted air outlet is required. The outlet should have a quick-coupler fitting and be located near the FB10000 press. An air dryer is required to ensure that the air supplied to the system is moisture free. Note The customer should ensure that the personnel required for the compressed air connection are available in time for the 2nd day of installation. Figure 4-11 Compressed Air Connection to FB10000 Figure 4-12 shows the type of quick connector that is required for the 10 mm compressed air line. Figure 4-12 Quick Connector for Compressed Air Line (1/2") 38 HP Scitex FB10000 Site Preparation Guide, Rev. 2