HP Scitex FB10000 Site Preparation Guide Rev. 2 - Page 61
Pit for Unloader Lift (optional)
View all HP Scitex FB10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Pit for Unloader Lift (optional) Note It is recommended to consult with an HP Scitex representative before choosing an unloading option. The most common method for unloading media involves placing the unloader lift on the floor next to the HP Scitex FB10000 Industrial Press. The media is unloaded using a forklift, and no additional preparations at the customer site are required. Machine Front View Side View Figure 4-18 Standard Solution for Unloading Media Caution Care must be taken if a forklift is used to unload the media to ensure that the forklift does not collide with the machine covers. Another option for unloading media is to dig a pit for the unloader lift, as shown in Figure 4-19. Machine Front View Side View Figure 4-19 Media Unloading Option #2 - Unloader Pit This option requires deepening the footprint area of the lift, as shown in Figure 4-19. The pit eliminates the height difference between the lift and the ground when the lift is loaded with media. The media is unloaded using a forklift. The HP Scitex representative will help the customer to mark the floor for preparing the pit. Chapter 4 - Site Planning 53