HP d640 HP D640 High-Volume Printer - Installation Manual (Printer and Accesso - Page 12

Installation Site Preparation Site Preparation This chapter provides step-by-step instructions for installing your printer. You may have purchased one of the following D640 accessories: • PostScript • Additional memory • Custom tray • High-Capacity Input (HCI) • High-Capacity Output (HCO) Install them only after you have completely installed and successfully tested the printer. Instructions for installing these accessories appear in Chapter 4, Accessories. Before you begin, make sure the location you have selected for your printer meets the space and environmental requirements, as shown in Table 2-1. Table 2-1 Printer Environment Specifications Power Requirements Physical Dimensions (without HCI/HCO) Length: Depth: Height: Physical Dimensions (with HCI/HCO) Length: Depth: Height: Weight Temperature Relative humidity 120-127 or 200-240 Vac ±10%, 50/60Hz, 12 or 7A. 23.0in (585mm) 25.2in (640mm) 40.6in (1,030mm) 55.7in (1414mm) 25.2in (640mm) 40.6in (1030mm) 298lbs (135kg) Operating: 59° F to 95°F (15° - 35°C) 40%-60% (optimal) Refer to the following illustrations for help in situating the printer. Remember to leave adequate space for opening the front and side covers, and for air circulation to the ventilation openings on the rear of the printer. If you have purchased the HCI or HCO, you need to reserve space for them as well. Installation 2-3