HP d640 HP D640 High-Volume Printer - Installation Manual (Printer and Accesso - Page 159
Connecting the Signal Cable and Power Cord
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Procedure 2: High-Capacity Output (HCO) Installation Connecting the Signal Cable and Power Cord 1. Plug the signal cable from the HCO into the connector on the rear bottom right of the back of the printer. See Figure 4-30. ON OFF Main Power Switch Input power cord connector Grounded outlet HCO Interface control cable Figure 4-30 Connecting the HCO Signal Cable and Power Cord NOTE: Make sure the main power switch is in the OFF position. 2. Connect the Power cord plug (female) to the AC inlet connector on the HCO. WARNING: The HCO relies upon grounding for protection against electric shock and to assure compliance with Electromagnetic Compatibility Regulations. Always connect printer to a proper grounded outlet. 4-30 Accessories
Procedure 2: High-Capacity Output (HCO) Installation
4-30
Accessories
Connecting the Signal Cable and Power Cord
1.
Plug the signal cable from the HCO into the connector on the rear bottom right of the
back of the printer. See Figure 4-30.
Figure 4-30
Connecting the HCO Signal Cable and Power Cord
NOTE:
Make sure the main power switch is in the OFF position.
2.
Connect the Power cord plug (female) to the AC inlet connector on the HCO.
WARNING:
The HCO relies upon grounding for protection against electric shock
and to assure compliance with Electromagnetic Compatibility
Regulations. Always connect printer to a proper grounded outlet.
Grounded outlet
Main Power Switch
Input power cord connector
HCO Interface
control cable
ON
OFF