HP d640 HP D640 High-Volume Printer - Installation Manual (Printer and Accesso - Page 45
Installing the Transfer Assembly
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Procedure 5: Inside the Front Door Installing the Transfer Assembly 1. Open the box in the Starter Kit that contains the transfer assembly. See Figure 2-8, on page 2-10. 2. Remove the transfer assembly from its packaging. 3. Using the alignment pin located on the end of the transfer assembly, insert the align- ment pin of the transfer assembly into the left rail of the transfer assembly guide at a slight angle and push in until it clicks into place. See Figure 2-33. CAUTION: As you handle the transfer assembly, avoid contact or damage to the transfer wire contained in the assembly. Transfer assembly guide Transfer assembly Transfer assembly guide Pin Transfer assembly Wire LTR Figure 2-33 Inserting the Transfer Assembly 2-36 Installation
Procedure 5: Inside the Front Door
2-36
Installation
Installing the Transfer Assembly
1.
Open the box in the Starter Kit that contains the transfer assembly. See Figure 2-8, on
page 2-10.
2.
Remove the transfer assembly from its packaging.
3.
Using the alignment pin located on the end of the transfer assembly, insert the align-
ment pin of the transfer assembly into the left rail of the transfer assembly guide at a
slight angle and push in until it clicks into place. See Figure 2-33.
CAUTION:
As you handle the transfer assembly, avoid contact or damage to the
transfer wire contained in the assembly.
Figure 2-33
Inserting the Transfer Assembly
Transfer assembly
Wire
Transfer assembly guide
LTR
Transfer assembly
Transfer assembly guide
Pin