HP d640 HP D640 High-Volume Printer - Installation Manual (Printer and Accesso - Page 99
Example, Original Alignment Value and Adjustment Value
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Procedure 15: Paper Path Alignment 5. Record this value in the adjustment value area for tray 1 on the simplex feed alignment ruler sheet. See Figure 2-99. Example Original alignment value 14 currently in printer +2 Write in adjustment +2 value from line measurement Figure 2-99 Original Alignment Value and Adjustment Value 6. Repeat steps 2 through 4 with the alignment sheets for trays 2, 3, and the HCI (if installed). Note: The printer still prints a sheet for the HCI even if no HCI is present. Simply ignore this page if you don't have an HCI connected and paper installed in it. 7. Now read the values for duplex pages as directed in the next section. 2-90 Installation
Procedure 15: Paper Path Alignment
2-90
Installation
5.
Record this value in the
adjustment value
area
for tray 1
on the
simplex feed align-
ment ruler sheet. See Figure 2-99.
Figure 2-99
Original Alignment Value and Adjustment Value
6.
Repeat steps 2 through 4 with the alignment sheets for trays 2, 3, and the HCI (if
installed).
Note:
The printer still prints a sheet for the HCI even if no HCI is present.
Simply ignore this page if you don’t have an HCI connected and
paper installed in it.
7.
Now read the values for duplex pages as directed in the next section.
Write in adjustment
value from line
measurement
Original alignment value
currently in printer
+2
Example
14
+2