HP d640 HP D640 High-Volume Printer - Installation Manual (Printer and Accesso - Page 39
Installing the Fuser,
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Procedure 5: Inside the Front Door NOTE: Check the voltage indication on the fuser. It is marked 120V-127V or 200V-240V. If you did not receive the correct fuser for your installation, contact your supplier for a replacement. 3. Push the fuser all the way into the printer until it stops. See Figure 2-27, below. Make sure the fuser is properly seated. Fuser Figure 2-27 Installing the Fuser 2-30 Installation
Procedure 5: Inside the Front Door
2-30
Installation
NOTE: Check the voltage indication on the fuser. It is marked 120V-127V or
200V-240V. If you did not receive the correct fuser for your installation,
contact your supplier for a replacement.
3.
Push the fuser all the way into the printer until it stops. See Figure 2-27, below. Make
sure the fuser is properly seated.
Figure 2-27
Installing the Fuser
Fuser