Kyocera ECOSYS M6535cidn ECOSYS M6035cidn/M6535cidn Operation Guide - Page 121

Preparation before Use > Loading Paper Loading Paper in the Multi Purpose Tray The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m2). For details of the supported paper sizes, refer to the following: Choosing the Appropriate Paper (page 11-15) For the paper type setting, refer to the following: Media Type Setting (page 8-14) Be sure to use the multi purpose tray when you print on any special paper. IMPORTANT • If you are using a paper weight of 106 g/m2 or more, set the media type to Thick and set the weight of the paper you are using. • Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inner tray may cause a paper jam. The capacity of the multi purpose tray is as follows. • Plain paper (80 g/m2), recycled paper or color paper: 100 sheets • Thick paper (209 g/m2): 15 sheets • Thick paper (157 g/m2): 30 sheets • Thick paper (104.7 g/m2): 50 sheets • Hagaki (Cardstock): 30 sheets • Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2: 5 sheets • OHP film: 1 sheet • Coated: 30 sheets NOTE • When you load custom size paper, enter the paper size by referring to the following: Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-11) • When you use special paper such as transparencies or thick paper, select the media type by referring to the following: Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-11) 1 Open the multi purpose tray. 3-7