Kyocera ECOSYS M6535cidn ECOSYS M6035cidn/M6535cidn Operation Guide - Page 98

Installing and Setting up the Machine > Command Center RX Accessing Command Center RX 1 Display the screen. 1 Launch your Web browser. 2 In the address or location bar, enter the machine's IP address or the host name. Click in the following order to check the machine's IP address and the host name. [Device Information] in the home screen > [Identification/Network] Examples: https://192.168.48.21/ (for IP address) https://MFP001 (if the host name is "MFP001") The web page displays basic information about the machine and Command Center RX as well as their current status. NOTE If the screen "There is a problem with this website's security certificate." is displayed, configure the certificate. Command Center RX User Guide You can also continue the operation without configuring the certificate. 2 Configure the function. Select a category from the navigation bar on the left of the screen. NOTE To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login]. Entering the predefined administrator password allows the user to access all pages, including Document Box, Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).) Login User Name: Admin Login Password: Admin 2-48