Kyocera ECOSYS M6535cidn ECOSYS M6035cidn/M6535cidn Operation Guide - Page 197

Operation on the Machine > Sending Scanning with File Management Utility File Management Utility is an application that sends a scanned document to a specified network folder or PC. You can create a work flow with FMU for processing of the scanned document, and register the workflow in the machine as a favorite. NOTE • To use this function, you must install File Management Utility on your computer and configure settings for the multifunction machine to be used, scanning conditions, and the file save location. To install File Management Utility, refer to the following: Installing Software (page 2-31) • For information on using File Management Utility, refer to the following: File Management Utility User Guide 1 Make sure that File Management Utility is running on the computer (or server) on which File Management Utility is installed. 2 Place the original. 3 Recall a favorite. 1 Select [Favorites] on the Home screen, or the key of the registered favorite. If you selected the key of the favorite registered with FMU, the favorite is activated. If you selected [Favorites], proceed to the next step. 2 Select the key of the favorite you want to use. 4 Follow the on-screen instructions to enter the necessary information and press [Next]. 5 When the scan settings screen appears, press each item and configure the necessary settings. The features that can be set depend on File Management Utility. 6 Press the [Start] key. Sending starts. 5-33