Kyocera ECOSYS M6535cidn ECOSYS M6035cidn/M6535cidn Operation Guide - Page 167

Operation on the Machine > Loading Originals Loading Originals in the Document Processor The document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are scanned. Originals Supported by the Document Processor The document processor supports the following types of originals. Weight Sizes No. of sheets 50 to 120 g/m2 (duplex: 50 to 120 g/m2) Maximum Folio (Legal) to Minimum A6-R (Statement-R) 75 sheets or less (50 to 80 g/m2) Originals Not Supported by the Document Processor Do not use the document processor for the following types of originals. Otherwise, the originals may be jammed or the document processor may become dirty. • Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before loading. Failure to do so may cause the originals to jam.) • Originals with adhesive tape or glue • Originals with cut-out sections • Curled original • Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam.) • Carbon paper • Crumpled paper How to Load Originals IMPORTANT • Before loading originals, be sure that there are no originals left on the original eject table. Originals left on the original eject table may cause the new originals to jam. • Do not make an impact on the document processor top cover, such as aligning the originals on the top cover. It may cause an error in the document processor. 1 Adjust the original width guides. 5-3