Kyocera ECOSYS M6535cidn ECOSYS M6035cidn/M6535cidn Operation Guide - Page 294

Setup and Registration (System Menu) > System Menu Interface Block Setting [System Menu/Counter] key > [System/Network] > [Interface Block Setting] This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional interfaces. Item Description USB Host USB Device USB Storage This locks and protects the USB port (USB host). Value: Unblock, Block This locks and protects the USB interface connector (USB Device). Value: Unblock, Block This locks and protects the USB memory slot. Value: Unblock, Block Optional Interface 1 *1 Optional Interface 2 *2 NOTE This function is available when USB Host is set to [Unblock]. This locks and protects the optional interface slots. Value: Unblock, Block NOTE If the machine has two optional interface slots, you can set this feature for each slot. *1 [Optional Interface] is displayed on ECOSYS M6535cidn. *2 Only on products with the fax function installed. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. Security Level [System Menu/Counter] key > [System/Network] > [Security Level] Item Security Level Description Specify the security level. Value Low: This mode is used during maintenance. Do not use normally. High: This is the security setting we recommend. Use this setting normally. Very High: In addition to [High] setting, this setting disables the machine settings to be changed from external command. Restart [System Menu/Counter] key > [System/Network] > [Restart] Restart Item Description Restart the CPU without turning the power switch off. Use this to deal with any unstable operation by the machine. (Same as the computer restart.) 8-34