Kyocera ECOSYS M6535cidn ECOSYS M6035cidn/M6535cidn Operation Guide - Page 286
System/Network
View all Kyocera ECOSYS M6535cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
Setup and Registration (System Menu) > System Menu System/Network Configures machine system settings. Network [System Menu/Counter] key > [System/Network] > [Network] Configures network settings. Host Name Item Host Name Description Check the host name of the machine. Host name can be changed from Command Center RX. Changing Device Information (page 2-51) TCP/IP Settings TCP/IP Item IPv4 Settings DHCP Auto-IP IP Address Subnet Mask Default Gateway Description Set up TCP/IP to connect to the Windows network. Value: Off, On Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to [On]. Select whether or not to use the DHCP (IPv4) server. Value: Off, On Select whether to use Auto-IP. Value: Off, On Set the IP addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP subnet masks. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP gateway addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-26