Kyocera ECOSYS M6535cidn ECOSYS M6035cidn/M6535cidn Operation Guide - Page 368
Removable Memory is
View all Kyocera ECOSYS M6535cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
Troubleshooting > Troubleshooting R Message RAM disk error. Checkpoints ― Removable memory error. Is writing to a removable memory prohibited? ― Removable Memory is ― full.*1 Remove originals in the Are there any originals left in the document processor. document processor? Replace all originals and - press [Continue]. Corrective Actions Reference Page An error has occurred on the RAM disk. Job is canceled. Select [End]. The possible error codes and their descriptions are as follows. 04: Insufficient space on the RAM disk. If the optional RAM dis is installed, increase the RAM disk size by changing RAM Disk Setting in System Menu. page 8-35 NOTE The range of RAM disk size can be increased by selecting [Printer Priority] in Optional Memory. An error occurred in the removable ― memory. The job stopped. Select [End]. The possible error codes and their descriptions are as follows. 01: Connect a removable memory that can be written to. An error occurred in the removable ― memory. The job stopped. Select [End]. The possible error codes and their descriptions are as follows. 01: The amount of data that can be saved at once has been exceeded. Turn the power OFF/ON. If the error still occurs, the removable memory is not compatible with the machine. Use the removable memory formatted by this machine. If the removable memory cannot be formatted, it is damaged. Connect a compatible removable memory. Job is canceled. Select [End]. ― Insufficient free space in the removable memory. Delete unnecessary files. Remove originals from the ― document processor. Remove originals from the - document processor, put them back in their original order, and place them again. Select [Continue] to resume printing. Select [Cancel] to cancel the job. 10-22