Kyocera TASKalfa 620 620/820 Operation Guide (Advanced) - Page 127

System Settings Orientation of Original Document Specifying the orientation of the original document on the platen. This is accomplished by telling the copier the direction to which the top side of the original faces. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Original Orientation and press [Change #]. System Menu / Counter Machine Default Default menu Check MP tray sizing Media Type (paper weigh)t Select media type(2sided) Special paper action mode Original Orientation System Menu Setting mode On Adjust print direction Top Edge Top Change # 3 Select [Top Edge Top] when the top of Original Orientation Back the original is facing towards the rear Select default mode for Original Orientatio,n side of the copier or [Top Edge Left] Top Edge or Top Edge Le.ft when the original is facing towards the left side of the copier. Top Edge Top Top Edge Le ft System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Setting Sleep Timer Timeout The Sleep timer conserves energy when there is no operation on the operation panel or no data is received. This predetermines the period of time before the copier enters sleep mode. The Sleep timer can be set from 1 to 240 minutes in 1-minute increments. NOTE: If the copier is used frequently, we recommend using a longer timeout. If it is used infrequently, use a shorter timeout. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Sleep mode changing time and press [Change #]. System Menu / Counter Machine Default Default menu Media Type (paper weight) Select media type(2sided) Special paper action mode Original Orientation Sleep mode changing time System Menu Setting mode Adjust print direction Top Edge Top 90 Minute Change # 3-27