Kyocera TASKalfa 620 620/820 Operation Guide (Advanced) - Page 128

System Settings 3 Use [+] to increase the time or [-] to Sleep mode changing time Back decrease the time from 1 to 240 Set Changing time to turn automatically into sleep mode minutes. after last setting,or when copying is don.e 90 Minute System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Setting Low-Power Timer Timeout Specifies the period of time before the copier enters Low-Power mode. The Low-Power time can be set from 1 to 240 minutes in 1-minute increments. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Low power mode chng. time and press [Change #]. System Menu / Counter Machine Default Default menu Select media type(2sided) Special paper action mode Original Orientation Sleep mode changing time Low power mode chng. time System Menu Setting mode Adjust print direction Top Edge Top 90 Minute 15 Minute Change # 3 Use [+] to increase the time or [-] to Low power mode chn.g time Back decrease the time from 1 to 240 Set Changing time to turn autom. into low power mode minutes. after last setting,or when copying is don.e 15 Minute System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Setting Auto Clear Timeout Time Automatically clears all temporary settings on the operation panel when no operation is made. Those settings revert to the default settings after the predetermined period of time. You can specify the period after copying before the copier automatically clears the previous settings. The auto clear timeout can be set from 10 to 270 seconds in 10-second increments. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 3-28