Lantronix EMG 8500 EMG User Guide - Page 100

7: Networking 2. Enter the following information: Reset Firmware Update Firmware WiFi Firmware File WiFi DB File Load Firmware via FTP/SFTP/SCP Server Path Allows you to reset the WiFi firmware to the factory default version. Allows you to update the WiFi firmware. The EMG unit reboots after you apply the update. Displays the name of the WiFi firmware (.bin) file. The Upload File link associated with this field is only available when you select HTTPS as the method to load the WiFi firmware. Displays the name of the WiFi database (.db) file. The Upload File link associated with this field is only available when you select HTTPS as the method to load the WiFi firmware. Allows you to select a method to load the WiFi firmware. The available options are FTP, SFTP, SCP, USB, SD Card, and HTPPS. By default, FTP is selected. The IP address or host name of the server used for obtaining updates, saving, or restoring configurations. It may consist of 64 alphanumeric characters, hyphens, and underscores. The default path on the server for obtaining firmware update files. Login/ Password/Retype Password 3. Click Apply. The user login credentials of the server. Troubleshooting Under rare conditions, it may be necessary to reset the WiFi interface if the EMG reports that the device wlan0 (wireless client device) or ap0 (access point device) cannot be found. The CLI command diag wlan reset can be used for this purpose. EMG™ Edge Management Gateway User Guide 100