Lantronix EMG 8500 EMG User Guide - Page 154

8: Services 2. Enter the following: Enable Agent Top Level MIB (link) EMG MIB (link) EMG MON MIB (link) Enable v1 Enable v2c Enable v3 Enable TLS Port Enables or disables the Simple Network Management Protocol (SNMP) agent, which allows read-only access to the system. Disabled by default. Click the link to access the top level MIB file for all Lantronix products. Click the link to access the EMG MIB definition file for EMGs. Click the link to access the EMG monitor MIB definition file for EMGs. If checked, SNMP version 1 (which uses the Read-Only and Read-Write Communities) is enabled. The default is disabled. If checked, SNMP version 2c (which uses the Read-Only and Read-Write Communities) is enabled. The default is enabled. If selected, SNMP v3 is enabled. SNMP v3 uses configurable security parameters, Read-Only, Read-Write, and Trap user name and password for authentication. The default is disabled. When selected and SNMP v3 is enabled, SNMP v3 transmit data over TLS, which uses X.509 certificates for authentication. The default is disabled. Indicates the port number that the TLS agent listens to. The port number of the traps sent over TLS will be the next port number. For example, if the Enable TLS port is 10161, the Enable Traps over TLS port number will be 10162. EMG™ Edge Management Gateway User Guide 154