Lantronix EMG 8500 EMG User Guide - Page 53

4: EMG 7500 Installation This chapter provides a high-level procedure for installing the EMG 7500 followed by more detailed information about the EMG connections and power supplies. Caution: To avoid physical and electrical hazards, please read Appendix B: Safety Information before installing the EMG. EMG 7500 Package Contents The EMG 7500 package includes the following items. Verify and inspect the contents of the EMG package using the enclosed packing slip. If any item is missing or damaged, contact your place of purchase immediately. Table 4-1 EMG 7500 Parts Name One EMG 7500 EDGE MANAGEMENT GATEWAY RJ45 to DB9F Adapter RJ45 to RJ45 Cat5 Cable, 6.6 ft (2m) straight-through RJ45 patch RJ45 Loopback Adapter External Universal AC (90W, 100-240V, 50/60 Hz) 12VDC power supply North American Power cord - 110V AC power cord, 8 ft (2.43m), RoHS Note: Power cords for international regions are available and sold separately. EMG 7500 Quick Start Guide Additional parts and accessories are available and sold separately. For details and purchasing information, refer to the next section Order Information.  Wall mount kit  Rail mount kit Order Information To view order information, part numbers and extended support options, go to https:// www.lantronix.com/products/lantronix-emg/#tab-order-now. User Supplied Items To complete your installation you will need the following items:  Medium size Phillips screwdriver to install the mounting brackets to the EMG unit, if applicable  One or more serial devices that require network connectivity  A serial cable for each serial device. - For RJ45 ports, you may use a straight-through RJ45 patch cable to connect to Cisco and Sun RJ45 serial console ports. - For USB ports, use a cable with a USB Type A connector EMG™ Edge Management Gateway User Guide 53